FAQ
What do you need help with?
Support
What do you need help with?
Update the DDJ-FLX10 firmware and rekordbox versions to the latest versions below.
DDJ-FLX10 firmware version 1.12 or later
rekordbox ver. 6.7.1 or later
Set PART ISO to EQ and MIDI assign to the default state if you've imported and used DDJ-FLX10 TrackSeparaton_Custom1.csv.
* The content customizing the assignment to the hardware on MIDI Learn will be deleted.
MIDI assign PART ISO Inst to EQ HI and PART ISO vocal to EQ MID if you've customized and used MIDI assign.
https://rekordbox.com/en/support/faq/trackseperation-6/#faq-q600182
Check the following.
In addition, carrying out the following may resolve the insufficient memory space, however, change the setting at your own risk.
https://rekordbox.com/en/support/faq/trackseperation-6/#faq-q600183
Check the following.
https://rekordbox.com/en/support/faq/trackseperation-6/#faq-46492
This is a function for outputting the sound of a track separately in VOCAL part, DRUMS part, and INST part. ACTIVE PART, PART ISO, and PART FX functions are usable.
With [MUTE] setting, output / mute of each part can be controlled.
With [SOLO] setting, output of all parts or output of one part can be controlled.
To activate TRACK SEPARATION function, check-mark [Enable the Track Separation function] (Click [Preferences] > [Extensions] tab > [TRACK SEPARATION] tab).
https://rekordbox.com/en/support/faq/trackseperation-6/#faq-q600181
Yes, it can be controlled by DJ equipment on which TRACK SEPARATION function is mounted.
In addition, you can use each function by assigning it to the hardware on MIDI LEARN.
However, it is necessary to subscribe to a supported Plan or connect a HardwareUnlock device.
https://rekordbox.com/en/support/faq/trackseperation-6/#faq-45856