Release notes

Ver.4.5.0 (2017.08.01)

[NEW]
-Compatible device added:DJM-750MK2.

Ver.4.4.0 (2017.07.06)

[NEW]
-Compatible device added: INTERFACE 2.

[IMPROVED]
-Increased the Output Level that can be set in the Preferences.

[FIXED]
-When a deck was paused, you couldn’t select it as the Master deck.
-A dialog message asking to insert a disk was displayed on certain computers when launching rekordbox on a computer with a card reader that had no memory card inserted.
-The track list skipped right before you stopped scrolling using the trackpad on a Mac.
-The TIME/REMAIN display was different on rekordbox dj and XDJ/CDJ.
-An incorrect curve was selected on the XDJ-R1 and XDJ-AERO when the crossfader curve selector switch was set to center position.
-Image files with transparency were pixelated when displayed in a video.
-The rekordbox application froze on Mac OS 10.9 when using functions that display a file save dialog.
-Potential big latency when using DVS.
-Improved stability of DVS.
-Improved stability and fixed other minor issues.

Ver.4.3.1 (2017.05.09)

[IMPROVED]
・Added a button to cancel downloading Pulselocker offline tracks.
・Depending on connected computers and DJ equipment, noise may occur when using PC MASTER OUT.

[FIXED]
・Potential freeze during certain operations while using Pro DJ Link.
・Potential flash of enlarged waveform when the waveform drawing rate is set to Low Speed.
・FX2 knob on a controller worked incorrectly in single FX mode.
・Potential crash when selecting an effect quickly in single FX mode.
・Potential freeze when selecting a playlist on a device.
・Potential crash when Sync Manager is set to a certain condition.
・Playlists or folders with the same name were created when importing, exporting or syncing them when the name included certain characters.
・Potential slow response when using Pulselocker.
・"Not connected to the internet" message was displayed when loading tracks in Pulselocker that weren’t allowed in your country.
・Potential crash when logging in to Pulselocker.
・The software crashed when installing rekordbox on a case-sensitive file system on a Mac and connecting a DDJ-RZX.
・Track information and waveforms weren’t displayed when pressing a CUE button right after loading a track.
・Video screen started flickering when loading a video file on a computer with certain built-in graphics cards.
・Inappropriate screen size if rekordbox was launched with a screen resolution of 1280x800 on a Mac.
・JOG, CUE and LOOP became unavailable during HOT CUE GATE playback by hitting a pad continuously while QUANTIZE is turned on.
・Improved stability of video functions.
・Improved stability and fixed other minor issues.

Ver.4.3.0 (2017.03.01)

[NEW]
-Compatible device added: DJM-250MK2
-rekordbox video (paid feature)
 -3 new TRANSITION FX
 -8 new TOUCH FX
 -Vertical movement in addition to horizontal allowed on TOUCH FX.
 -Combining BEAT FX/CFX with TOUCH FX available.
 -Visualizer
 -Karaoke file format MP3+G support
 -Full screen button
 -Touch Keyboard shown on the DDJ-RZX centre screen when connected.
 -Syphon Out.

[IMPROVED]
-Reduced CPU load when connecting a DDJ-RZX. (Click here for details.)
-LOOP is shown on the overview waveform in each deck.
-You can add a track to a playlist by dragging and dropping a track title in a deck to a playlist.
-Faster loading time of unanalysed tracks.
-Pulselocker tracks available offline.

[FIXED]
-Sometimes crashed when a Pulselocker track was downloaded or loaded to a deck.
-Beat grid for certain video files was wrong. Please note that tracks must be analysed again to fix the issue.
-Scrolling was slow when browsing tracks which were played via PRO DJ LINK.
-Sometimes crashed when launching rekordbox if a controller was connected.
-Switching MASTER DECKs and enabling QUANTIZE became unavailable if rekordbox was used for a long time.
-Playback speed became slow or fast suddenly.
-The RELEASE FX beat value was displayed incorrectly when launching rekordbox.
-SLAVE DECK sometimes played a short loop when a MASTER DECK got in a PAUSE status while the SLAVE DECK was playing a loop longer than one beat.
-Sometimes audio was not output from the Headphones CUE when PERFORMANCE mode was selected from EXPORT mode.
-HOT CUE GATE playback did not stop if it was played using a keyboard shortcut in EXPORT mode.
-There were no shortcuts for HOT CUE D-H in EXPORT mode.
-An error message was displayed on some computers when rekordbox was launched while a card reader was connected without a memory card.
-Sometimes crashed when rekordbox closed.
-Sometimes crashed when tracks were imported by drag-and-drop.
-Unable to switch to browse screen with a space key while in Japanese input mode on Windows.
-Unstable BPM when using DVS.
-Waveforms and beat grid were not shown when using PRO DJ LINK and playing a track from a database moved to an external HDD.
-Elapsed/remaining time setting of each deck was not saved.
-Crashed when many tracks were exported.
-Shortcut for the Explorer disappeared when rekordbox relaunched if a parent folder name included "&".
-Sometimes a fractional part of the MASTER BPM changed when the MASTER deck changed using BEAT SYNC.
-Play position jumped to the beginning of a track when synced before the beginning of the track.
-Crashed when tags were reloaded for multiple tracks.
-GUI was not shown properly when screen resolution was 1366x768.
-Beat Count information was not shown in the DDJ-RZX screen.
-The video crossfader was not working when controlled from connected hardware in external mixer mode.
-Improved stability and fixed other minor issues.

Ver.4.2.5 (2016.12.06)

【NEW】
-DDJ-SP1 can be used with another controller supporting rekordbox dj.
-Pitch bend in MIDI learn.
-rekordbox video:
 -Delay Compensation.
 -Keyboard shortcuts and MIDI learn for the video panel.
 -9 new TRANSITION FX.
 -10 new TOUCH FX.
 -Video mute feature when audio is not played.

【IMPROVED】
-Reduced CPU load when playing video files.
-Tempo range will not change automatically when the Master is changed or turning sync off while syncing until when tempo slider is operated.
-Smoother TRANSITION FX
-Windows: Audio driver updated:
 -XDJ-RX Audio Driver 1.200 - Fixed an issue where no audio output from the XDJ-RX when playing tracks in iTunes on a connected computer and an issue where ASIO buffer size could not be changed at the Setting Utility on the 64-bit version of Windows.
 -DDJ-RB / DDJ-RR Audio Driver 1.200 - Fixed an issue where ASIO buffer size could not be changed at the Setting Utility on the 64-bit version of Windows.

【FIXED】
-mac OS Sierra 10.12:
 -Specific video/audio files may crash on.
 -Some Japanese characters were not displayed in the Preferences.
-Mac:
 -Enlarged waveforms of VBR MP3 tracks were missing when played on the CDJ/XDJ.
 -“No audio device” appeared as audio output could not be set to Pioneer CDJ/XDJ created by CDJ/XDJ Aggregator.
-Mac/Windows (64-bit): The enlarged waveform was not shown on the monitor screen on CDJs and XDJs and the waveform was shown at the beginning of a track where no sound exists and beat grid was shifted when using LINK EXPORT.
-Windows: Sometimes crashed if an item is selected on a popup window saying “Do you want to change audio device?” when connecting with CDJ-2000NXS2 or CDJ-TOUR1 via USB.
-Windows (32-bit): Analysis of some video files stopped at 99 % and could not finish.
-rekordbox video:
 -Preview was not displayed when displaying a video track list right after launch.
 -When Collection contains a video file without audio, a popup window appeared saying “Some tracks in the Collection were analyzed by an older version of rekordbox”.
-DDJ-RZX: Waveform disappeared when the layout is changed to Browse while a track is being loaded to a deck.
-DDJ-SB/DDJ-SB2: PAD was not lit even if PAD 2 ~ 4 was pressed when selecting PAD FX2.
-Sometimes audio stopped when the Spiral up or down was used.
-Fixed preview volume. Please adjust volume before using it.
-Width of the tree view changed when rekordbox quits while in full screen mode.
-ACTIVE CENSOR could not be viewed on waveforms when switched to EXPORT mode with the ACTIVE CENSOR panel open and then switched back to PERFORMANCE MODE.
-MEMORY CUE was not displayed on CDJ/XDJ display when connecting certain CDJ/XDJ via USB and loading some tracks in PERFORMANCE mode.
-Track became unselected if the FAVORITE button was pressed on a selected track.
-Entering BPM values was not available when editing Grid in PERFORMANCE mode.
-WAV/AIFF/FLAC file not imported in rekordbox collection could not be exported when directly dragging & dropping to a USB device.
-Tempo changed when accidentally touching a jog if MASTER deck SYNC was turned on.
-Cue positions displayed on enlarged waveform slightly moved under some conditions.
-Grid and waveform slightly moved in PERFORMANCE mode under some conditions.
-Keyboard shortcut settings of [Show/Hide Category Filter] and [Show/Hide My Tag filter] were opposite.
-Sometimes crashed when scrolling through files using KEY in My Tag Filter.
-Improved stability and fixed other minor issues.

Ver.4.2.4 (2016.10.06)

The below issue occurred in rekordbox Ver.4.2.3
Please update rekordbox to this version (Ver.4.2.4).

【FIXED】
 -Sync Manager did not sync playlists.

 Please note:
 When you sync playlists which were not synced in Ver.4.2.3,
 firstly please untick the unsynced playlists and click the Sync button (the arrow icon).
 Then, tick the unsynced playlists again and click the button to sync them.

Ver.4.2.3 (2016.10.04)

macOS Sierra support.

【NEW】
 -Compatible device added:
  -DJM-450.
 -New MIDI LEARN added: Open/close of MIXER, REC and VIDEO panels.

【IMPROVED】
 -Mac: An HDD/SSD connected over Thunderbolt or Firewire is shown in Explorer in Tree View.
 -Mac: The second partition of an HDD/SSD is shown in Explorer in Tree View.
 -Search filter: Letters can be inputted in the Search field after clicking the [x] button.
 -Keyboard shortcuts for toggling the layout (Decks and Browse screen).

【FIXED】
 -MIDI LEARN: The name of a function which already had a control was not indicated.
 -CFX user configuration was not saved.
 -Setting was not saved on the sampler deck EDIT screen.
 -FX single/multi mode was not saved.
 -Artwork disappeared on iTunes when setting My Tag on rekordbox.
 -A freeze sometimes occurred when browsing in the Explorer.
 -Crashed when switching to EXPORT mode when using OSC sampler.
 -BPM became zero (0) when a track was imported from rekordbox XML.
 -Windows (some versions only): MASTER output failed even when PC MASTER OUT was ON.
 -Pro DJ Link: (Windows 64-bit version only) Tracks were sometimes unable to be loaded on CDJ/XDJ.
 -DDJ-RZX: FX name did not change on the GUI of the DDJ-RZX when FX was changed on PAD FX1/2.
 -XDJ-RX: Connections periodically failed in some cases.
 -Pulselocker: Fixed to prevent error message from appearing when network connection was cut out.
 -Improved stability and fixed other minor issues.

Ver.4.2.2 (2016.09.08)

[NEW]
-Pulselocker support
-Compatible device added:
 -DDJ-WeGO4
-XDJ-1000MK2 HID control
-TRACK number now appears on the CDJ / XDJ display when using HID control.
-Auto Beat Loop can be controlled from the DDJ-RB GUI.

[FIXED]
-When a US keyboard is connected, keyboard shortcuts [SHIFT+number key] worked incorrectly.
-Pre-fader CFXs were unable to be heard in the HeadPhone Cue.
-An analyzed key was not shown on a deck even when a loaded track was key-analyzed on a deck and the mode was switched between PERFORMANCE and EXPORT mode.
-BEAT GRID button was grayed out.
-rekordbox crashed with the "Unexpected application error" message when switching from EXPORT mode to PERFORMANCE mode.
-Zoom rate of waveforms shown on the right and left decks did not match.
-"Add To Tag List" in the drop-down menu was not shown when right-clicking on a track list.
-The panel size, playlist palette and shortcuts settings and playlist folder status were not saved.
-When creating and editing a playlist in a folder of the tree view, the folder was not expanded and the playlist collapsed.
-Pulselocker: Network error repeatedly appeared while offline.
-Pulselocker: Error message appeared when starting offline and then connecting to the internet.
-When connecting a 2-ch mixer or controller, the DVS audio routing window did not appear.
-DDJ-RZX: Crashed during playback in DVS mode or USB connection disconnected after no response.
-DDJ-RZX: When the TOUCH FX [HOLD] and [OFF] buttons were selected, sound changed when turning the COLOR knob even when CFX was not selected.
-DDJ-RZX: FX was canceled when moving a fingertip outside of the VIDEO screen during TOUCH FX.
-DDJ-RZX: when some types of CFX were selected and the Sampler Repeat screen was touched, the selected CFX changed.
-DDJ-RZX and Windows: Track selection did not move to the next in tandem with the movement of the browse knob when the rekordbox screen was minimized.
-DDJ-RZX and Mac (El Capitan only): Delayed response when using Sound Color FX.
-DJM-900NXS and Windows: “No Audio Device” appeared when changing settings at Setting Utility and closed it.
-DJM-T1: REC panel channel failure.
-rekordbox video and Windows: When using multiple displays and using the full screen mode on one of them, the window is minimized when outside of rekordbox was clicked.
-Windows: Full screen freezed or partly disappeared.
-Windows: Some track information displayed incorrectly in Hebrew.
-Windows 64-bit version: Sequence Load was unavailable.
-Improved stability and fixed other minor issues.

Ver.4.2.1 (2016.08.02)

[New Plus Pack]
 -RMX EFFECTS Plus Pack (paid feature)

[NEW]
-Windows 64-bit version
 To install Windows 64-bit version, please download it from rekordbox.com.
 Install 64-bit audio drivers for your DJ equipment as well (available on pioneerdj.com > Support)
-Support of all languages including Hebrew and Arabic if your OS supports them
-Recording in EXPORT mode
 -Recording of audio input from hardware connected via a USB cable
 -Automatic start/stop of recording
 -Detection of silence between tracks to enable automatic recording as a separate track
 -Normalise function to standardise recording volume
 -Automatic import of recorded files to your library
 -Display of the Tag information panel after recording 
-Recording in PERFORMANCE mode
 -Automatic stop of recording
 -Detection of silence between tracks to enable automatic recording as a separate track
 -Normalise function to standardise recording volume
 -Automatic import of recorded files to your library
 -Display of the Tag information panel after recording
-Enlarged waveforms of tracks playing in rekordbox dj are shown on the multiplayer’s screen when a PC/Mac is directly connected using only USB cables (USB-HID control).* 1
-Expanded USB Export: multiplayer suggests matched tracks to play next (marked by Matching feature). *1
-KUVO (http://kuvo.com/) is available even when connected using only USB cables (USB-HID control).*1
 *1: Available on CDJ-2000NXS2 (Ver.1.40 or later) and CDJ-TOUR1 (Ver.1.10 or later).
-Compatible units added for PC MASTER OUT that enables a computer’s speaker for master out and a controller for headphones.*2
 *2: Click here for compatible products.
-Playback will not start when CUE is turned on and AUTO BEAT LOOP is set.
 (To do so, open [Preferences] -> [Controller] -> [Deck] -> [Hot Cue] and tick ”During Pause, GATE playback is applied.”)

[FIXED]
-XDJ-700, XDJ-1000: Freezed while touching the needle search strip and the jog dial at the same time.
-When moving a loop forwards or backwards, it went out of sync even with QUANTIZE and SYNC on.
-MASTER TEMPO was turned off when rebooted.
-After changing the LABEL field and then using the tab button to navigate to the GENRE field, the keyboard focus disappeared and impossible to type in the GENRE field.
-LOOP IN/out on CDJ blinked when calling MEMORY CUE while the CDJ-2000 was connected via Pro DJ LINK.
-When calling HOT CUE/LOOP during Pause or Cue Standby in Export mode, the playback did not pause at the HOT CUE point.
-DDJ-SB2: Headphones audio output level did not change when turning MIXING knob while PC MASTER OUT.
-HOT CUE did not start on a deck when paused if GATE playback was disabled and SYNC was enabled.
-When adding unanalyzed tracks and playing on a deck with QUANTIZE on, CUE point could not be set after analysis.
-Some languages could not be read on Windows10.
-When HOT CUE was deleted, color of the next HOT CUE changed.
-Track analysis took long.
-Loading of some video files to a deck took long.
-The waveform zoom was not the same on some decks making beat matching almost impossible.
-CDJ-2000: A LOOP instead of a CUE was set when a user tried to set a CUE.
-Crash occurred when setting ACTIVE CENSOR IN/OUT.
-Crash sometimes occurred when opening Preferences and changing settings.
-Windows: Recording of Master out was unavailable while DVS was enabled because the Master out was switched to the DVS signal.
-When multiple HOT CUEs were set and deleted one by one, sometimes they were not deleted.
-Improved stability and fixed other minor issues.

Ver.4.2.0b (2016.07.11)

[FIXED]
-Sync manager sometimes functions incorrectly.
-Tracks may be duplicated or deleted when using playlists.
-Software may “crash” when using CDJ/XDJ via PRO DJ LINK.

Ver.4.2.0 (2016.07.01)

[NEW Plus Pack]
-rekordbox video (paid feature)*.
-Video/image/slideshow.
-Overlay of text/image/live camera feed.
-Transition FX.
-Touch FX.

*If you have a rekordbox dj license you have access to a rekordbox video 30 day free trial.
rekordbox video is included with rekordbox dj subscription and available during the 30 day free trial.
All Plus Packs are available during the subscription and 30 day free trial.

[NEW]
-Compatible device added: DDJ-RZX
-Active Censor: Apply FX to specified sections of a track.
-CFX Multi mode / Parameter knob
-Auto Cue
-DJM-900NXS/DJM-900NXS2 EQ setting
-Headroom setting
-Longer recording hours (record in 3-hour files)
-SAMPLER playback start point moves while long-pressing the adjustment button.
-Option: Playback position returns to the CUE point and pauses after spinning JOG when a CUE is turned on.

[FIXED]
-Crashed when opening Tree View.
-Tree View was not displayed when minimizing its size.
-Crashed when importing a corrupt file.
-Audio output at incorrect timing when SLICER, HOT CUE, SLIP, etc. was triggered.
-Hum noise occurred when calling MEMORY CUE. 
-GRID position changed in certain tracks when switching PERFORMANCE mode to/from EXPORT mode.
-Master output recording disabled when using a DJ unit without REC OUT with Internal Mixer mode (e.g. XDJ-RX, XDJ-R1).
-PC MASTEROUT disabled when using dvs on DDJ-RX/SX2.
-Crashed when opening Preferences from the file menu on a Windows 10 PC.
-Grouping information in the iTunes category was not displayed.
-Freezed when sync of History and My Tag simultaneously conducted.
-Improved stability and fixed other minor issues.

Ver.4.1.2 (2016.06.01)

[NEW]
-Pulselocker (*Public Beta)
*Logging in to the Pulselocker streaming service is required. Pulselocker is available in a limited number of countries. For further information, please visit the Pulselocker website.

[FIXED]
-When connecting a DDJ-ERGO, audio was not output according to the position of the Headphones MIXING knob.
-DDJ-SB/SB2 rebooted when a certain button was pressed.
-Click noise occurred in the recording on Windows.
-Click noise occurred in the audio when Windows built-in audio driver and LINK MONITOR are selected in Preferences > [Audio].
-Improved stability and fixed other minor issues.

Ver.4.1.1 (2016.04.26)

[NEW]
-Compatible devices added:
 -DDJ-RR
 -DDJ-RB
-SEQUENCE CALL: Call and play sample sequences directly with pads.(*)
-SEQUENCE LOAD: Load a sample sequence onto a deck to scratch it, etc.(*)
-PC MASTER OUT: Enable computer’s speaker for master out and controller for headphones.(*)
-Import and export of XML data of Hot Cue E-H and color.
-Collective import of playlists in a folder in the XML tree view.
* Click here for compatible products.

[IMPROVED]
-Search speed changes according to JOG speed when spinning [SHIFT]+JOG on a controller.

[FIXED]
-A USB device was not shown in the Explorer tree even if it was inserted in a computer (PERFORMANCE mode)
-Playback sometimes jumped not slipped when [SLIP]+[HOT CUE] was played with a controller pad.
-Playback did not return to the playback in the background from SLIP Loop even if the pad was released when [SLIP]+[HOT LOOP] was played with a controller pad.
-Playback jumped when [INT] was switched to [REL] in the DVS mode.
-PAUSE canceled and playback started when 2 [HOT LOOP] were pressed and released during PAUSE.
-Audio dropouts occurred with certain audio devices.
-HOT CUE GATE playback worked incorrectly during pause when pressing HOT CUE multiple times during SYNC.
-Improved stability and fixed other minor issues.

Ver.4.1.0 (2016.03.22)

[NEW]
-rekordbox dvs (paid feature).
-Multi-language track information support.
-DJM-T1 support (control only).

[FIXED]
-Improved stability and fixed other minor issues.

Ver.4.0.8 (2016.02.24)

[NEW]

-XDJ-RX. Full HID connection established enabling Track Browsing and Waveform Display.
(Please update XDJ-RX firmware v2.00.)

Compatible devices added:
-DDJ-SB
-DDJ-SB2
-DDJ-SP1

-Drag and drop to load the same track from one deck to another without stopping the first deck.

[FIXED]

-Improved stability and fixed other minor issues.

Ver.4.0.7 (2016.02.18)

[NEW]

With a DJM-900NXS2 connected to a computer via USB you can control x4 CDJ-2000NXS2 via PRO DJ LINK.
(Please update the DJM-900NXS2 firmware to 1.09 or later. The “Connection Guide” is here).

Compatible devices added:
-DDJ-ERGO
-DDJ-WeGO
-DDJ-WeGO2
-XDJ-R1

[IMPROVED]

-Crossfader characteristics in Export mode.

[FIXED]
-Crashed when MyTag was revised when synchronised to MyTag data on a USB device when the USB device was recognised.
-Performance became slow after using rekordbox with certain types of controllers.
-Preview playback volume was not adjusted by the Master volume.
-Improved stability and fixed other minor issues.

Ver.4.0.6 (2016.02.02)

[NEW]

MIDI LEARN – Assignment of rekordbox dj functions to MIDI controllers.

CDJ-2000NXS2 new features
[Export Mode]
-FLAC/Apple Lossless with a frequency of 44.1, 48, 88.2 and 96 kHz.
-WAV/AIFF with a frequency of 88.2 and 96 kHz.
-8 HOT CUE buttons: A–H.
-MY SETTINGS new features;
 QUANTIZE BEAT VALUE, HOT CUE AUTO LOAD, HOT CUE COLOR and PHASE METER.
-USB DEVICE SETTINGS new features;
 Wave Color (BLUE/RGB) and Waveform (Half/Full).
-Export My Tag/Matching information to USB devices.
-HOT CUE color change.
-Export of HOT CUE color information to USB devices.

[Export/Performance Mode]
Track filtering new features; KEY, RATING and COLOR.

DJM-900NXS2 new features
[Performance Mode]
(When using the DJM-900NXS2 as an audio device).
-Input channels selected on DJM-900NXS2 are displayed on rekordbox dj virtual decks.
-Quantize BEAT FX of DJM-900NXS2 can be applied to rekordbox dj output audio.
-rekordbox dj BEAT FX tail can be heard after CH FADER/CROSS FADER is closed/cut on DJM-900NXS2 (POST FADER).

[FIXED]
-Crashed when certain tracks were selected from track list.
-Crashed when BPM was edited in EDIT window of SAMPLER SLOT when the BPM value of the track was 0 (zero).
-SLIP MODE remained when SLIP REVERSE was selected within one beat while playing a track with QUANTIZE on.
-Output channel settings reset back to default when starting up (EXPORT MODE).
-Preview playback issue on Related Track List etc.
-Improved stability and fixed other minor issues.

Ver.4.0.5 (2015.12.17)

[NEW]
-rekordbox dj - Plus Pack monthly payment Subscription Service.
-Audio setting pop-up window when CDJ connects.
-GATE COMP in PAD FX.
-PITCH in BEAT FX.
-XDJ-RX PITCH in FX.
-THRU crossfader curve setting for the XDJ-RX/AERO.

[FIXED]
-Audio settings did not change in EXPORT mode while DJM or certain audio interface connected.
-Hum occurred when scratching using TEMPO slider with MASTER TEMPO engaged.
-Menu window disappeared when clicking drop-down menus in INFO tab in INFO window.
-Reading/writing of tag information did not work properly on certain AIFF files.
-Crashed when playback started before the start point of a track.
-Crashed when editing artwork in INFO window.
-Improved stability and fixed other minor issues.

Ver.4.0.4 (2015.12.03)

[NEW]
-XDJ-1000/XDJ-700 Track browsing and Waveform in HID mode.
-XDJ-RX support (control only).
-XDJ-AERO support (control only).
-Auto Play on all decks.
-SAMPLER GRID Edit.
-GATE COMP in CFX.

[FIXED]
-Crash when editing BEAT GRID.
-Track Search only worked correctly on Deck1 on multiple CDJs/XDJs in HID mode.
-Keyboard shortcut worked incorrectly when entering characters in Search and Tag information fields.
-BPM value displayed incorrectly when loading analysis-locked tracks in EXPORT mode.
-Improved stability and fixed other minor issues.

Ver.4.0.3 (2015.11.18)

[NEW]
- CDJ-900 Track Browsing and Waveform Display in HID mode.
- CDJ-400 support.
- Coloured display for played tracks.
- Sampler playback position indication.

[FIXED]
- Cross Fader did not work in EXPORT 2-player mode.
- TEMPO RANGE changed to WIDE when loading a track.
- Enlarged Waveform speed changed when Tempo Range changed.
- HOT CUE Gate Playback did not work during BEAT SYNC.
- CUE markers were incorrectly displayed on the CDJ-2000NXS/900NXS/2000 in HID mode.
- Metronome paused in certain situations.
- Improved CDJ/XDJ JOG scratch latency in HID mode.
- Improved stability and fixed other minor issues.

Ver.4.0.2 (2015.11.04)

[NEW]
CDJ-2000/2000NXS/900NXS Track Browsing and Waveform Display in HID mode.
Playback when paused when pressing HOT CUE (via Preferences).
Autoplay via PERFORMANCE mode (DECK1 only all decks Dec 2015).
XDJ-700 support (Track Browsing and Waveform Display Dec 2015).
DDJ-RX support.
Drop-down menu appears when left-clicking and holding on track list.

[FIXED]
Cross Fader Curve setting in PERFORMANCE worked in EXPORT mode.
Vinyl Speed Adjust in PERFORMANCE mode worked in EXPORT mode.
Auto Gain in PERFORMANCE mode worked in EXPORT mode.
HOT CUE colour in PERFORMANCE mode worked in EXPORT mode.
BPM of loaded track displayed incorrectly in EXPORT mode.
Track incorrectly loaded when double-clicking in PERFORMANCE mode.
Memory CUE worked incorrectly at 00:00:000.
Artwork could not be edited in Info Window with multiple tracks selected.
Related Tracks did not show up with MASTER DECK selected (Customise the criteria > Current Track).
Track starts playing when the CUE button is quickly clicked.
Keyboard shortcut to set the grid to current playing position.
Channel Fader Curve setting.
CDJ/XDJ low volume level on master output.
Improved stability and fixed other minor issues.

Ver.4.0.1 (2015.10.13)

-Fixed an issue where Mac receives an error saying the audio driver cannot be recognized when connected to DJM-2000/2000nexus using a USB cable.
-Fixed an issue where SLIP is not enabled even if JOG wheel is spinning back while [SLIP] mode is on.
-Fixed an issue where full waveform of a newly analyzed track may not appear.
-Fixed an issue where Cross Fader Curve does not work properly.
-Fixed an issue where Sync Manger window comes as a black window on a low-resolution monitor screen
-Fixed an issue where scratch mode cannot be canceled when enlarged waveform is scratched with a mouse.
-Fixed an issue where BPM is not properly displayed when TEMPO slider is dragged.
-Improved operation stability and fixed other minor issues.

Ver.4.0.0 (2015.10.01)

Added PERFOMANCE mode for DJ performance
- To use PERFORMANCE mode, start TRIAL where you can use PERFORMANCE mode for 30 days or activate rekordbox dj Plus Pack.

Improvements in EXPORT mode (equivalent to rekordbox3.0.0 and earlier)
- Extended lower limit of BPM to 40.
- Enabled export of a file with more than 1000 tracks on the following products and firmware. On other products and firmware, more than 1000 tracks will not be displayed.
CDJ-2000NXS (Ver.1.24~)
CDJ-900NXS (Ver.1.22~)
XDJ-1000 (Ver.1.05~)
XDJ-RX (Ver.1.70~)
- Added [MASTER PLAYER] in the selection of [Current Track] in the [Customize the criteria] section of the related track list window.
- Added [Tracks in the selected playlist] in the selection of [Search Target] in the [Customize the criteria] section of the related track list window.
- Added [Browse] in keyboard shortcuts.
- Added setting of Full/Preview waveform at [View] > [Preferences].
- Added RGB for Full/ Preview waveform color.
- Improved color display of enlarged waveform.
- Realized colored HOT CUE markers.
- Added setting of [Show the selected track to the center] at [View] > [Preferences].
- Added selection of [Large/Small] of Line Space at [View] > [Preferences].
- Added buttons to minimize/maximize/close the screen at full-screen mode. To enable this, click [View] at the menu bar and select [Full screen].
- Added display of Battery meter and Audio Dropout meter.
- Fixed minor issues.

Ver.3.3.0 (2015.08.04)

  • Added a function to export My Tag and Matching information to rekordbox(iOS) and perform the “Update Collection” option to reflect the information from rekordbox(iOS). (This function is available after v.2.0.0 of rekordbox(iOS). It is not available with rekordbox (Android))
  • Fixed an issue of not always loading a track even if a track is selected and the Return key is pressed.
  • Fixed an issue where rekordbox does not restore from being minimized to Dock on Mac.
  • Fixed an issue where it takes time to show track information when many genres are stored in rekordbox.
  • Fixed an issue where the speed of waveforms in the 2 Player mode are not always synced.
  • Fixed other minor issues.

Ver.3.2.2 (2015.07.13)

  • Fixed an issue where iTunes playlist folders cannot be accessed with ITunes 12.2.

Ver.3.2.1 (2015.04.07)

  • A setting item is added to Preferences (*) in order to address an issue that rekordbox crashes on some computers when or after the waveform is displayed.
    *From [Preferences] > [View] > [Waveform drawing], please untick the box of “Use high functional waveform drawing” and reboot rekordbox.

  • Fixed an issue that some letters are garbled and disappeared.

  • Fixed an issue where RELATED TRACKS are not correctly selected when using Key as criteria.

  • Fixed other minor issues.

Ver.3.2.0 (2015.02.03)

  • rekordbox supports XDJ-RX.
  • Added a feature to show the secondary browser.
  • Added an option to set the fourth Hot Cue.(for XDJ-RX)
  • Added an option to show the cue markers on the preview waveform.
  • Added a feature to preview the Active Loop.
  • Added options to show the beat count to the next Memory Cue.
  • Added an option to prevent tracks from being re-analyzed and beatgrids from being edited.
  • Added an option to change the location of Master Database.
  • Improved the intelligent playlist function where tracks sorted by the specific column can be exported..
  • Added keyboard shortcuts for the preview operation.
  • Improved the [Save Playlist Info] function where Summary column also can be exported.
  • Improved the preview function where the audio output of the preview can be monitored via Pro DJ Link.
  • Fixed an issue in relocating missing tracks.
  • Fixed an issue where specific tracks are duplicated in the collection on Mac.
  • Fixed an issue where specific tracks imported from the external drive and exported to the same drive cause track load error on the CDJ.
  • Fixed other minor issues.

Click here to see details of the new features.

Ver.3.1.0 (2014.11.20)

  • rekordbox supports XDJ-1000.

  • Added a new setting in the Analysis tab where a memory cue point can be set at the first beat of a track when analyzing.

  • Memory cue comments for tracks in Devices become available.

  • Scrolling on a touchpad on Windows becomes available.

  • Added an option of 192kHz sample rate for output audio device in the Audio tab.

  • Loading information such as cue points in rekordbox xml becomes available when tracks are reimported from rekordbox xml.

  • Fixed other minor issues.

Click here to see details of the new features.

Ver.3.0.3(Mac) / 3.0.2(Win) (2014.10.30)

  • rekordbox 3.0.3 supports OS X Yosemite.

  • Solved an issue where rekordbox cannot play tracks in iTunes 12 on Mac.

Ver.3.0.2 (2014.10.01)

-Continuous-play is available when loading a track from a playlist in One Player mode.
-Fixed an issue that could cause rekordbox to crash during analyzing some AIFF files.
-Fixed an issue where ratings are were lost when reloading tags.
-Fixed an issue where total number, time and size of tracks in the playlist you selected were not shown on the GUI.
- Fixed other minor issues.

Ver.3.0.1 (2014.08.05)

  • Improved sync performance with devices.
  • Fixed an issue where rekordbox 3.0 sometimes stops auto-analyzing the tracks.
  • Fixed an issue where a track exported to a device cannot be played on CDJ when the file name includes / (slash) and other particular characters.
  • Added a keyboard shortcut to search inside of Collection.
  • Four or more devices can be displayed in the device category of the tree view.
  • Fixed an issue where tracks imported from network drive cannot be played via Pro DJ Link.
  • Fixed other minor issues.

[Note]
After Windows version of v.3.0.1. is installed, it may take a few minutes for updating. Please wait patiently until the updating process is complete.

Ver.3.0.0 (2014.07.02)

All new rekordbox is released. Enjoy!

Ver.2.2.4 (2014.03.13)

  • Fixed an issue observed when editing wav file tags.

Ver.2.2.3 (2014.02.12)

  • Fixed an issue where synchronisation takes place every time a USB device is connected.
  • Fixed an importing issue where track information is imported incorrectly when imported via a rekordbox XML file.

Ver.2.2.1 (2014.01.20)

  • Now supports Mac OS X 10.9.
  • Fixed a rare issue where rekordbox could crash during start up.
  • Fixed an issue where rekordbox would not load if a username included an apostrophe.

Ver.2.2.0 (2013.10.16)

  • New intelligent playlist feature.
  • Increased speed during synchronisation.
  • KUVO compatible.
  • Fixed a rare issue where the CDJ-2000NXS would keep displaying “NOW LOADING" when a track is loaded.

Ver.2.1.1 (2013.08.28)

  • Select and synchronise playlists with USB/SD devices.
  • Amended track information is updated on USB/SD devices when re-exporting.
  • Reveal which playlists include a selected track.
  • Option to 'Remove From Collection' is available in the Playlists and Tag list panes.
  • Option to add 'Key' values to ID3 tags (for MP3 & AIFF) in preferences.
  • Warning message appears on import for filenames over 255 characters in length (CDJs can't read such files via ProDJ LINK).
  • Import 'My Settings' from rekordbox smartphone Apps.
  • Exporting to USB/SD devices will ignore missing tracks.
  • Fixed Beat Grid importing bug (via Bridge, only visible on CDJs).

Ver.2.0.7 (2013.06.04)

  • XDJ-R1 compatible.
  • Increased speed when searching / sorting songs.
  • Accent-insensitive sort for Latin characters.
  • Fixed issues concerning ‘rekordbox XML’.
  • Fixed XDJ-AERO loading issues when using ‘LINK’ on computers with Microsoft Office ‘Click-to-Run’ installed.

Ver.2.0.3 (2013.02.04)

1.Fixed an issue where rekordbox would crash when exporting tracks.
2.Fixed an issue where the enlarged waveform on the CDJ would be incorrect by 1 frame when using the ProDJ Link.
3.Fixed an issue where the CDJ would freeze when using the ProDJ LINK if the FOLDER category was at the top of the active category list in rekordbox.
4.Fixed an issue where rekordbox would store incorrect information in the RELEASE DATA field.

Ver.2.0.2 (2012.12.11)

What's new in rekordbox Ver.2.0.2
● rekordbox now supports Mac OSX 10.8 and Windows 8.
● SYNC Master status of the DJM-2000nexus will now be displayed in rekordbox.
● rekordbox 2.0.2 can now export detailed beat grid information to an XML file.
● Fixed an issue where rekordbox would crash when analysing a track.
● Fixed an issue where rekordbox would crash with various operations.
● Fixed an issue with beat grid inaccuracy created with v1.6.0/v1.6.2/v2.0.0/v2.0.1.
● Fixed an issue where a cue point would sometimes not be exported to a device
● Fixed an issue where key analysis would not restart when re-launching rekordbox.
● Fixed an issue where artwork would deteriorate if added to multiple tracks.
● Fixed an issue where the beginning of a analysed waveform would be cropped with certain MP3 files.
● Fixed an issue where rekordbox would not create an MEP-4000 library when using Mac OSX 10.8.

Ver.2.0.1 (2012.09.10)

What's new in rekordbox Ver.2.0.1
●rekordbox supports features of CDJ-2000nexus.
(1) Enlarged waveform display for the CDJ-2000nexus during the analysing process.
(2) Make an "Active Loop" for use on the CDJ-2000nexus.
(3) Select if "Hot Cues" load automatically on the CDJ-2000nexus.
(4) CDJ-2000nexus "Utility Menu" settings can be managed and exported using "My Settings".
(5) When using the "Pro DJ Link" rekordbox can act as the Master BPM deck.
●Key Detection added during the analysing process.
●The option "Property" has been added to the menu when you right click a track that will open the "Info" screen.
●First beat of the bar displayed.
●Set the first beat of the bar in "Adjust BPM / Beat Grid Mode".
●The BPM range has been increased from 180 to 499 (the maximum BPM during the analysing process remains at 180).
●1 minute markers are displayed on the waveform.
●Quantize is on by default.  Only when you turn "Quantize" off on the player will "Quantize" not work.
●Fixed an issue where rekordbox would crash if "Cue" information was damaged on a "Device".
●Fixed an issue where rekordbox would replace artwork with the incorrect artwork on a "Device".
●Fixed an issue where "Artist Names" would be replaced with "Album Names" when reloading a tag after editing the "Album Names" field.
●Fixed an issue where "Genre" would be replaced when browsing with the arrow keys on a Mac.
●Fixed an issue where "Playlists" would be incorrectly displayed on a "Device" when overwriting the playlist more than 16,000 times.
●Fixed an issue where the "Link" button would not be displayed when using the "Pro DJ Link".
●Fixed an issue where rekordbox would crash when tracks are deleted in a certain way.

Ver.1.6.2 (2012.08.21)

What's new in rekordbox Ver.1.6.2
●rekordbox supports the newly introduced rekordbox (iOS/Android).
(1) Tracks and playlists can be exported to rekordbox (iOS/Android).
(2) When you click [Update collection], information updated in rekordbox (iOS/Android) including CUE, BeatGrid, color, rating and comments can be reflected in the [collection] in your computer.
●rekordbox supports XDJ-AERO.
(1) XDJ-AERO connected to rekordbox via wireless LAN can play the music files in rekordbox.
(2) The rotary selectors and buttons on XDJ-AERO can control the browse panel of rekordbox.
(3) The name of rekordbox to be displayed on XDJ-AERO can be changed in [Preferences] -> [Export].
●Improved the accuracy of beat grid information analyzed by rekordbox.
●Fixed the crash problem which occurs when re-exporting multiple playlists managed by a certain tree structure.
●Added a function to fix the misaligned BeatGrid and cue points in mp3 files which (i) have been encoded by LAME encoder with the gapless setting and (ii) have been analyzed and adjusted by rekordbox before version 1.5.3. (As of version 1.5.4, rekordbox has disabled gapless playback of LAME-encoded mp3 files.)

Note: For details of ver. 1.5.4, please refer to the following site:
http://rekordbox.com/support/info.php?lang=en#info_283

Ver.1.5.4 (2012.07.03)

What's new in rekordbox Ver.1.5.4
●MEP-4000 is supported.
*This product is on sale in limited areas, such as South America, India and China.

About rekordbox Version 1.5.4
Version 1.5.4 is only for MEP-4000 and new rekordbox users. Version 1.5.4 disables gapless playback for MP3 files encoded with the LAME encoder on players such as the CDJ-2000. Disabling gapless playback for MP3 files encoded with the LAME encoder in Version 1.5.4 will shift existing beat grids, loops or cue points of mp3 files encoded with the LAME encoder that have been analysed and adjusted with an older version of rekordbox. The offset value depends on the sampling frequency of the file: 24ms (in the case of 48kHz), 26ms (in the case of 44.1 kHz). However, it does not alter the audio play back on the CDJ's just visually inside rekordbox, therefore you do not need to reanalyse your tracks and redefine the beat grids, loops or cue points.
Pioneer will provide a tool to automatically adjust the beat grids, loops or cue point data in a future update. We recommend that you wait.
Thank you for your understanding.

Ver.1.5.3 (2012.04.04)

Changes implemented since previous version
●Playlists can be saved in m3u8.
●A button is added to open preferences.
●The context menu adds a function to save a playing loop in a wav file.
●If tracks in rekordbox are stored in iTunes, track information in iTunes library can be reflected to that in rekordbox.
●Music files can be copied from Collection to Explorer (Windows)/ Finder (Mac) by Drag & Drop.
●If there is a wrong data in ID3 tag, it will be ignored, and the other correct information will be displayed.
●Tab key works to move the cursor in [Information] pane.
●When importing from File menu, the last folder that was previously opened opens first.
●Fixed an issue that a short track whose BPM is analyzed as 0 caused rekordbox to crash when adjusting beat positions.
●Fixed an issue that Bit Rate of AIFF files was always shown as VBR.
●Fixed is an issue that editing Tag of ID3 v2.2 and re-reading it caused Artwork to disappear.
●Fixed is an issue that importing some particular tracks caused rekordbox to crash during analyzing them.

Ver.1.5.2 (2012.03.30)

Changes implemented since previous version
●OS X 10.7 Lion is supported.
●Support for AIFF format tags.
●Fixed the issue where unselected tracks were exported.
●Fixed the issue where a newly-created playlist was misplaced and displayed in a wrong order.
●Fixed the issue where rekordbox crashed when importing particular types of tracks.
●Fixed the issue where rekordbox becomes unstable when 65535 or more tracks were in the collection.
●Fixed the issue where rekordbox crashed when a large number of folders/playlists with long names were dragged and exported to USB device.
●Fixed the issue where it took longer to renumber playlists than using ver.1.4.1.
●Fixed the issue where rekordbox crashed when launching it with particular USB devices connected.

Ver.1.5.1 (2011.09.20)

Changes implemented since previous version
●Fixed issue where rekordbox becomes unbootable due to a track analysis irregularity.
●Fixed issue where rekordbox crashes or freezes when the user attempts to add tracks to the Collection or add/remove tracks from a playlist while track analysis is active.
●Fixed issue where Mac version of rekordbox crashes when attempting to export a playlist to an external drive where a playlist of the same exists.
●Fixed issue where the metronome outputs a static sound when any value besides 44.1 kHz has been set for the audio output under Preferences.
●Fixed issue track where a renumbering operation does not perform as expected if multiple instances of the same track exist in a playlist.
●Encountered an issue with OS X 10.7 Lion which occurs when the user attempts to move the PIONEER folder (analysis files) to a location outside of his/her login name folder (under Users). When trying to move to a location outside of this folder, the original PIONEER folder is deleted even though the copy operation is not successfully completed. As a result, this latest update restricts the user's ability to move the PIONEER folder so that it must remain in the login folder.
●Fixed issue where playback stops if a playlist is right-clicked and [Sort Items] is selected if the current track being played is from that playlist.

Ver.1.5.0 (2011.06.29)

Changes implemented since previous version
●Now possible to adjust beat position from the middle of a track.
●Now possible to sync beat position to in-app metronome.
●[ReleaseDate] in the [Info] pane can now be edited.
●Added button for creating playlists and hot cue bank lists.
●Newly-created playlists and hot cue bank lists are now displayed at the top of the folder which contains them.
●Now possible to toggle between the currently selected track and the currently playing track while displaying information in the [Info] pane.
●Number of tracks which can be included in a tag list have been updated from 60 to 100.
●When multiple tracks are selected, the total number of tracks, total disk space, and total time are now displayed in the lower status bar.
●Track information search performance has been enhanced.
●Performance has been improved for inserting tracks into large playlists.
●Improved navigation performance for auto-scrolling and folder opening while dragging and dropping tracks and playlists.
●When made visible, column now appears near position of mouse cursor.
●USB-MIDI Control Mode is now displayed as a DJ player in the Link Status Panel.
●Fixed issue where folders/playlists of the same name in iTunes were not displayed properly in the [Bridge] pane.
●Reading from XML-formatted playlists is now supported.

Ver.1.4.1 (2011.01.27)

Changes implemented since previous version
●Fixed issue where multiple word searches were not displaying the correct results.

Ver.1.4.0 (2011.01.06)

Changes implemented since previous version
●Enhanced beat position editing to allow more detailed modifications.
●Now possible to relocate multiple tracks.
●When tracks are imported from iTunes, it is now possible to convert the "Grouping" field from iTunes into the "Label" field in rekordbox.
●The DJ Play Count field can now be edited via the [Infomation] pane.
●New feature available to initialize a new device database if the old one has been corrupted.
●All analysis files and artwork are now automatically moved when the analysis file location is modified.
●Tracks can now be loaded to a DJ player which is connected by PRO DJ LINK by using keyboard shortcuts.
●The "Rating" field is now editable while PRO DJ LINK is active.
●Fixed issue where license key is asked again when network interface setting has been changed.
●Fixed issue where pressing the eject button was unsuccessful when using an HDD.
●Fixed issue where certain AAC files could not be imported.
●Fixed issue where the "Rating" ID3 tag was sometimes incorrectly read while performing a track import.
●Improved read-time of USB device to minimize the amount of time required to display its contents.
●Improved speed on rekordbox's launch time.
●Improved the track sorting method.
●Improved the [Infomation] pane layout.

Ver.2.1.3 (2017.06.19)

  • Fixed issues where import and playback was unavailable when umlauts and accents, etc. are included in the artist, album or track names on iOS 10.3.

Ver.2.1.2 (2016.12.17)

  • Fixed some issues on iOS10.

Ver.2.1.1 (2016.05.20)

  • Improved the operability and stability of rekordbox.

Ver.2.1.0 (2016.02.23)

  • 8 HOT CUEs for the CDJ-2000NXS2.
  • QUANTIZE BEAT VALUE, HOT CUE AUTO LOAD, HOT CUE COLOR, PHASE METER, WAVE COLOR (Blue/RGB) *1 and WAVEFORM (Half/Full) *1.
  • Track Filter *2.
  • Improved stability and fixed other minor issues.

    *1 Available only when tracks already analysed by rekordbox on Mac/Windows are exported to iPhone rekordbox.
    *2 [My Tag] is available only for filtering.

Ver.2.0.2 (2015.11.26)

  • Improved user functionality of XDJ-AERO.

Ver.2.0.1 (2015.09.02)

  • Changed the way to display beat count.
  • Improved user functionality of XDJ-AERO.
  • Improved the operability and stability of rekordbox.

Ver.2.0.0 (2015.08.04)

  • The GUI has been refurbished.
  • Added a function to import My Tag and Matching information from rekordbox (Mac/Windows) ver.3.3.0 or later and perform the “Update Collection” option to reflect the information to rekordbox (Mac/Windows).
  • Added the Preview function.
  • Added the Favorite and Trash folders.
  • Added 2 player mode. (This is in-app purchase option.)

Ver.1.3.1 (2015.01.27)

  • Fixed a typo in GUI.

Ver.1.3.0 (2015.01.20)

  • Added support for XDJ-1000 and XDJ-RX.
  • Comments can be added to Memory Cue and Hot Cue.
  • Four hot cues can be set only for XDJ-RX.
  • Added the [RECENTLY ADDED] feature to show a list of tracks recently imported to rekordbox.
  • Added [Continuous Play] to automatically play the next track until the end of the track list in rekordbox.
    Single Play (one track at a time) or Continuous Play mode can be selected.

Ver.1.2.0 (2013.12.18)

  • Added the remote control function that enables the following controls for the XDJ-AERO:
    ・Operation of effects on an XY pad
    ・Direct selection of the beat for the AUTO BEAT LOOP function

Ver.1.1.7 (2013.09.17)

  • Fixed some issues on iOS7.
    ・Fixed an issue associated with importing tracks from iTunes to rekordbox.
    ・Fixed an issue associated with connecting multiple rekordbox (iOS) to CDJ-2000nexus via Wi-Fi.

Ver.1.1.6 (2013.07.22)

  • Supported iPhone 5 screen size.
  • Artwork will appear on the album list.
  • Added the waveform of the track to the Load screen.
  • Added the FWD/REV buttons to the beatgrid adjustment screen.
  • Selecting the Time Mode (Elapsed or Remaining) becomes available on the beatgrid adjustment screen.
  • An error message will appear when a track is unable to be imported.
  • Other issues fixed.

Ver.1.1.5 (2013.02.04)

  • Fixed an issue where some MP3 file formats could not be played.
  • Added a [Go to User Manual] button to jump to the contents page of the user’s manual when tapping this button after the [Help] in the view [Prepare] / [Load] / [Setting].
  • Other issues fixed.

Ver.1.1.4 (2012.12.10)

  • Added a feature to make a playlist from a tag list when a device is connected to the CDJ-2000nexus via USB.
  • Added a feature to purge temporary files on a device if the Wi-Fi connection is lost during file transfer.
  • Fixed an issue that in rare cases imported mp3 files could not be played on the CDJ-2000nexus.

Ver.1.4.0 (2016.03.02)

  • 8 HOT CUEs for the CDJ-2000NXS2.
  • QUANTIZE BEAT VALUE, HOT CUE AUTO LOAD, HOT CUE COLOR, PHASE METER, WAVE COLOR (Blue/RGB) * and WAVEFORM (Half/Full) *.
  • Improved stability and fixed other minor issues.

    *Available only when tracks already analyzed by rekordbox on Mac/Windows are exported to iPhone rekordbox.

Ver.1.3.2 (2015.04.12)

  • Improved the operability and stability of rekordbox.

Ver.1.3.1 (2015.03.20)

  • Improved the operability and stability of rekordbox.

Ver.1.3.0 (2015.01.20)

  • Added support for XDJ-1000 and XDJ-RX.
  • Comments can be added to Memory Cue and Hot Cue.
  • Four hot cues can be set only for XDJ-RX.
  • Added the [RECENTLY ADDED] feature to show a list of tracks recently imported to rekordbox.
  • Added [Continuous Play] to automatically play the next track until the end of the track list in rekordbox.
    Single Play (one track at a time) or Continuous Play mode can be selected.

Ver.1.2.1 (2014.07.02)

Fixed an issue where rekordbox (Android) were unable to be launched on Android 4.4 and later.
・Due to the specification change of Android 4.4 and later, writing to SD card is restricted by Android.
A library can be newly created in the location where writing to SD card is allowed by Android 4.4 and later ((sdcard)/Android/data/jp.pioneer.prosv.android.rbm/files).

Note: If those who use an SD card on Android 4.3 and earlier update to Android 4.4 and later, track information will not be displayed due to the above-mentioned restriction.
If you encounter such a problem, please import the tracks in the Android device or in rekordbox (Mac/Windows) to rekordbox (Android) again.

Note: An issue where some Android devices cannot be connected to CDJ using a USB cable if such a device is updated to 4.4 or later has been identified.
If you cannot connect CDJ to your mobile device using a USB cable, please try connecting them via Wi-Fi.

Ver.1.2.0 (2013.12.18)

  • Added the remote control function that enables the following controls for the XDJ-AERO:
    ・Operation of effects on an XY pad
    ・Direct selection of the beat for the AUTO BEAT LOOP function

Ver.1.1.6 (2013.07.22)

  • Supported Android 16:9 aspect ratio.
  • Artwork will appear on the album list.
  • Added the waveform of a track to the Load screen.
  • Added the FWD/REV buttons to the beatgrid adjustment screen.
  • Selecting the Time Mode (Elapsed or Remaining) becomes available on the beatgrid adjustment screen.
  • An error message will appear when a track is unable to be imported.
  • Other issues fixed.

Ver.1.1.5 (2013.02.04)

  • Added the [Location of the library] to the [Setting] menu. (You will be able to specify the [Location of the library] in the Android version of rekordbox. Depending on the model of the Android device, the database or track files may be stored in the internal memory as default instead of an external SD card. If you change the default value in this setting, you will be able to store the database or track files to an external SD card. Please note that after the above setting is changed, you will not be able to see the tracks exported and imported before the change.
  • Added a [Go to User Manual] button to jump to the contents page of the user’s manual when tapping this button after the [Help] in the view [Prepare] / [Load] / [Setting].
  • Other issues fixed.

Ver.1.1.4 (2012.12.10)

  • Added a feature to make a playlist from a tag list when a device is connected to the CDJ-2000nexus via USB.
  • Added a feature to purge temporary files on a device if the Wi-Fi connection is lost during file transfer.
  • Added a feature to display a search bar when the menu button of the device is tapped.