FAQ

What do you need help with?

MIX POINT LINK
  • Let me know the procedure for operating MIX POINT LINK function with a mouse.

    Example:

    Procedure for mixing from track A of Deck 1 to track B of Deck 2.

    1. Set Hot Cues or Memory Cues to the position of MIX POINT preliminarily. To use SYNC function, set BEAT SYNC to ON.
    2. Click MIX POINT LINK panel button of global section to display MIX POINT LINK panel.
    3. Load track A to Deck 1 to replay it. Load track B to Deck 2.
    4. Click the Enlarged Waveform of Deck 1 in MIX OUT selection mode to set the Deck 1 to MIX OUT deck.
    5. Click the marker of Hot Cues/Memory Cues that is displayed on Enlarged Waveform of Deck 1 to set it to MIX POINT (MIX OUT).
    6. Click the Enlarged Waveform of Deck 2 in MIX IN selection mode to set the Deck 2 to MIX IN deck.
    7. Click the marker of Hot Cues/Memory Cues that is displayed on Enlarged Waveform of Deck 2 to set it to MIX POINT (MIX IN).
    8. Press MIX POINT LINK button and set MIX POINT LINK.

    If the replay bar of Deck 1 reaches the beginning of Deck 2, the automatic playing starts.

    *The MIX POINT set in steps 5 and 7 can also be set by pressing the [MIX POINT SELECT] button on the MIX POINT LINK panel.
    *When the Silent is turned on, the tracks in the deck are muted from the start of a track to the Silent end point. To turn on the Silent, select deck 2 in the MIX IN selection mode after step 7 or 8, then turn on the [SILENT on/off] button.

     

    https://rekordbox.com/en/support/faq/mixpoint-link-7/#faq-46548

  • Let me know how to operate MIX POINT LINK using MIDI LEARN function as hardware.

    Example:

    Here explains about the operation method referencing the procedure for assigning the button of MIX POINT LINK to the hardware on MIDI LEARN and mixing track A of Deck 1 to track B of Deck 2.

    1. Set Hot Cues or Memory Cues to the position of MIX POINT preliminarily. To use SYNC function, set BEAT SYNC to ON.
      In MIX POINT LINK tab of MIDI LEARN, assign [MixPointLink CueSelectBack/Next] button and [MixPointLink Set] button to the hardware on MIDI LEARN.
    2. Load track A to Deck 1 to replay it. Load track B to Deck 2.
    3. Press [MemoryCueCall] button of Deck 2 or the button / pad for which Hot Cues are set and call the starting MIX POINT from the cue point of track B or Hot Cues.
    4. Press [MixPointLink CueSelectBack/Next] button of Deck 2 and select the ending MIX POINT from track A that is currently replayed.
    5. Press [MixPointLink Set] button and set MIX POINT LINK.
      If the replay bar of Deck 1 reaches the beginning of Deck 2, the automatic playing starts.

     

    https://rekordbox.com/en/support/faq/mixpoint-link-7/#faq-46546

  • Is it possible to zoom in/out the waveform on MIX POINT LINK panel?

    Yes, it is possible to zoom in/out the waveform.

    Put a mouse cursor on the waveform on MIX POINT LINK panel and operate the mouse wheel.

    On Mac, click and hold the waveform on the track pad and swipe it up and down to zoom in/out the waveform.

     

    https://rekordbox.com/en/support/faq/mixpoint-link-7/#faq-46540

  • When connecting some MIDI devices including a DJ controller, MIX POINT LINK function was locked with a key icon and became disabled.

    For MIX POINT LINK function, you can try mouse operation only when a MIDI/HID device is not connected.

    If you want to use a MIDI/HID device or Keyboard shortcuts, you will need to subscribe to a supported Plan.

     

    https://rekordbox.com/en/support/faq/mixpoint-link-7/#faq-46534

  • Can MIX POINT LINK function be controlled by DJ equipment?

    Yes, it can be controlled by DJ equipment on which MIX POINT LINK function is mounted.

    In addition, you can use each function by assigning it to the hardware on MIDI LEARN.

    However, it is necessary to subscribe to a supported Plan.

     

    https://rekordbox.com/en/support/faq/mixpoint-link-7/#faq-46530